Carpet Extractor

Our carpet extractor range has been carefully selected for its simplicity. Catered specially for tough jobs in a limited area, our recommendations would resolve most problems in an economic and efficient manner.

SCUP Carpet Extractor Complete 25L
code: SCUP
Voltage 240V
Motor (watt) 1200
Type 2 Stage By Pass
Water Lift 2200mm
Airflow 170m3/h
Pump 48w
Pump Pressure: 2 bar
Chemical Capacity: 11 liter
Total Tank Capacity: 32 liter

Genius Carpet Extractor Complete 60L
code: GENIUS 700
Voltage 240V
Motor (watt) 2 x 1200
Type 2 Stage By Pass
Water Lift 2200mm
Airflow 340m3/h
Pump 90w
Pump Capacity 1.8 liter/min
Pump Pressure: 3.5 bar
Chemical Capacity: 25 liter
Total Tank Capacity: 60 liter


Hot Water Extraction System

Prosteam Carpet Extractor, a great heavy duty general purpose extractor, is designed for easy operation, maintenance and produces great results with its built in heating system.

It removes ground-in dirt and residue from carpet and upholstery without over wetting and leaving the carpet and cushion clean and ready for use in a few hours.


Hot Water Extraction Systems

code: Prosteam Carpet Extractor
Solution Capacity
11.5 Gal
Recovery Capacity
12 Gal
Pump Pressure
11psi
Vacuum Motor
Two /Single/By Pass
Maximum Waterfit / Minimum Waterlift
180" Waterlift/090" Waterlift
Voltage
240 Volt/50hz
Heater
1.2 Kwatt
Thermostat Control
30°C to 110°C (Factory set at 70°C)
Control Switch
4 Switches, 2 Motors, 1 heater, 1 Pump
Electric Cable
25 ft
Ampere
13.6A
Vacuum Hose
14ft
Slution Hose
13ft heavy Duty With Brass Coupling
Height
29 1/2 " (70.5cm)
Width
16 1/2" (40.2cm)
Length
26" (60 cm)
Shipping Weight
50 kg


[Vacuum Cleaners] [Floor Scrubber / Polisher] [Automatic Scrubber/Sweeper] [High Pressure Machine]
[Carpet Extractor] [Wind Blower] [Mopping Equipment] [WashRoom Equipment]
[Window Equipment] [Signages ] [Chemical]